Rebuilding your LeRoi Air Compressor Air-End

The number one reason to rebuild your LeRoi air compressor airend is economic. Rebuilding the LeRoi air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new LeRoi compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my LeRoi Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following LeRoi’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your LeRoi Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on LeRoi’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my LeRoi Air Compressor airend?

Air end rebuild costs vary depending on the HP of your LeRoi Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. Contact the expert Airend Rebuilders at www.OEMAirCompressor.com today.

Rebuilding your Joy Air Compressor Air-End

The number one reason to rebuild your Joy air compressor airend is economic. Rebuilding the Joy air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Joy compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Joy Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Joy’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Joy Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Joy’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Joy Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Joy Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. Contact the expert Airend Rebuilders at www.OEMAirCompressor.com today.

Rebuilding your Bauer Air Compressor Air-End

The number one reason to rebuild your Bauer air compressor airend is economic. Rebuilding the Bauer air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Bauer compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Bauer Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Bauer’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Bauer Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Bauer’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Bauer Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Bauer Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. Contact the expert Airend Rebuilders at www.OEMAirCompressor.com today.

Rebuilding your Curtis Toledo Air Compressor Air-End

The number one reason to rebuild your Curtis Toledo air compressor airend is economic. Rebuilding the Curtis Toledo air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Curtis Toledo compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Curtis Toledo Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Curtis Toledo’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Curtis Toledo Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Curtis Toledo’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Curtis Toledo Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Curtis Toledo Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. Contact the expert Airend Rebuilders at www.OEMAirCompressor.com today.

Rebuilding your Kaeser Air Compressor Air-End

The number one reason to rebuild your Kaeser air compressor airend is economic. Rebuilding the Kaeser air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Kaeser compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Kaeser Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Kaeser’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Kaeser Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Kaeser’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Kaeser Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Kaeser Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. Contact the expert Airend Rebuilders at www.OEMAirCompressor.com today.

Rebuilding your Gardner Denver Air Compressor Air-End

The number one reason to rebuild your Gardner Denver air compressor airend is economic. Rebuilding the Gardner Denver air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Gardner Denver compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Gardner Denver Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Gardner Denver’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Gardner Denver Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Gardner Denver’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Gardner Denver Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Gardner Denver Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. Contact the expert Airend Rebuilders at www.OEMAirCompressor.com today.

Rebuilding your Quincy Air Compressor Air-End

The number one reason to rebuild your Quincy air compressor airend is economic. Rebuilding the Quincy air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Quincy compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Quincy Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Quincy’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Quincy Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Quincy’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Quincy Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Quincy Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. Contact the expert Airend Rebuilders at www.OEMAirCompressor.com today.

Rebuilding your Sullair® Air Compressor Air-End

 

The number one reason to rebuild your Sullair air compressor airend is economic. Rebuilding the Sullair air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Sullair compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Sullair Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Sullair’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Sullair Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Sullair’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Sullair Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Sullair Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. Contact the expert Airend Rebuilders at www.OEMAirCompressor.com today.

Rebuilding your Champion Air Compressor Air-End

The number one reason to rebuild your Champion air compressor airend is economic. Rebuilding the Champion air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Champion compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Champion Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Champion’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Champion Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Champion’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Champion Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Champion Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty.

Rebuilding your CompAir Air Compressor Air-End

The number one reason to rebuild your CompAir air compressor airend is economic. Rebuilding the CompAir air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new CompAir compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my CompAir Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following CompAir’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your CompAir Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on CompAir’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my CompAir Air Compressor airend?

Air end rebuild costs vary depending on the HP of your CompAir Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty.

Rebuilding your Ingersoll Rand Air Compressor Air-End

The number one reason to rebuild your Ingersoll Rand air compressor airend is economic. Rebuilding the Ingersoll Rand air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Ingersoll Rand compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Ingersoll Rand Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Ingersoll Rand’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Ingersoll Rand Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Ingersoll Rand’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Ingersoll Rand Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Ingersoll Rand Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

Look for a rebuilder who guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty.

Rebuilding your Atlas Copco Air Compressor Air-End

The number one reason to rebuild your Atlas Copco air compressor airend is economic. Rebuilding the Atlas Copco air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new Atlas Copco compressor air-end or rebuilding the air end before it fails.

How do I prevent a failure of my Atlas Copco Air Compressor airend?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following Atlas Copco’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

When should you rebuild your Atlas Copco Air Compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on Atlas Copco’s manufacturing, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

How much will it cost to rebuild my Atlas Copco Air Compressor airend?

Air end rebuild costs vary depending on the HP of your Atlas Copco Air Compressor and the condition of the airend, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from OEM Air Compressor. Oil and filters should also be budgeted.

We guarantee our stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. To obtain warranty coverage, the customer must complete the warranty registration for within 30 days upon initial start-up and purchase the replacement parts and lubricants from us every 2000 hrs.

Why Rebuild an Air Compressor Air-End?

The number one reason to rebuild your air compressor air-end is economic. Rebuilding the air end will extend the life of your air compressor. There are three basic considerations when deciding to buy a new compressor air-end or rebuilding the air end before it fails.

Consideration 1: How do I prevent a failure of my compressor air end?

The best way to prevent a failure of your compressor is a proper maintenance and testing program. Following the manufacturer’s recommended maintenance schedules and changing the oil regularly will help keep the compressor “clean” and avoid the most common breakdown caused when contaminated oil damages the bearings and seals in the compressor air-end.

Consideration 2: When should you rebuild your compressor airend?

The best time to rebuild your compressor air end is before it fails. The life of the air-end depends on manufacturer, the environment the compressor runs in, the maintenance program that has been used on the compressor, the type of oil the compressor uses, and the way that the compressor is used. The most critical factor is the maintenance program because proper maintenance of a compressor will overcome most of the other factors. You should be running routine analysis of oil, bearing vibration, bearing temperature, and air end temperature. If these parameters start to show unwanted variances, it is probable time to rebuild the air end.

Consideration 3: How much will it cost to rebuild my air-end?

Air end rebuild costs vary depending on the manufacturer, the HP of the machine, and the condition, but in general a complete air end rebuild can be accomplished for half the price of a new air end. You must factor in costs for removal and installation, as well as any shipping costs to and from the rebuilder. Oil and filters should also be budgeted.

When looking for an air end rebuilder, go to one that you can trust such as OEM Air Compressor in Chicago. OEM Air Compressor guarantees their stationary remanufactured airends to be free from defects in material replaced or labor performed with a Lifetime Warranty. To obtain warranty coverage, the customer must complete the warranty registration for within 30 days upon initial start-up and purchase the replacement parts and lubricants from them every 2000 hrs.

To see a list of which manufacturers, models, and base prices, go to their airend rebuilding page.

Find air end pricing for these manufacturers:

Air-End Rebuilding for Atlas Copco® Air Compressors
Air-End Rebuilding for Bauer® Air Compressors
Air-End Rebuilding for Champion® Air Compressors
Air-End Rebuilding for CompAir® Air Compressors
Air-End Rebuilding foe Curtis Toledo® Air Compressors
Air-End Rebuilding for Gardner Denver® Air Compressors
Air-End Rebuilding for Ingersoll-Rand® Air Compressors
Air-End Rebuilding for Joy® Air Compressors
Air-End Rebuilding foe Kaeser® Air Compressors
Air-End Rebuilding for LeRoi® Air Compressors
Air-End Rebuilding for Quincy® Air Compressors
Air-End Rebuilding for Sullair® Air Compressors
Air-End Rebuilding for Tamrotor® Air Compressors
Air-End Rebuilding for Worthington® Air Compressors

What is an Air-End?

The heart of an air compressor is the screw element which is also called air-end. The air-end is the most important part of any screw-type compressor. It’s that part of the machine where the actual compression takes place. It is the heart of the rotary screw air compressor.

They are constant flow (volume) with variable pressure compressors. Which mean that at a given speed (rpm), they always supply the same amount of air (in liters per second for example), but can do so at different pressures.

Why are they so popular? Since it’s a continuous process (as opposed to reciprocating piston compressors) they supply a steady, non-pulsating air flow, with minimum vibrations and maintenance and maximum lifetime.

How does an air-end work? Inside the compressor element are two screws that turn in opposite directions. The rotary screw compressor is a “positive displacement” compressor, which means that the air is physically squeezed together by an external force (like piston and scroll compressors).

In the case of the rotary screw, the air gets trapped between the two rotors. The rotors have a special design for optimal efficiency and performance. One rotor is the “male” and the other is the “female”. The air gets sucked in on one side (cold, low-pressure), and gets trapped between the rotors, and then is discharged out the other side (hot, high pressure). This compression requires power, which is usually supplied by a large electro motor.

There are two basic types of screw compressors: oil-injected and oil-free. Oil injected rotary screw compressors are the most common, since they are the cheaper of the two. Oil-free screw compressors are used in applications where the compressed air must be 100% oil free, like for food processing and chemical plants.

They can operate 24/7, 365 days a year. The normal lifespan of a screw element is about 40.000 running hours, before a complete overhaul is necessary. That's when the folks at www.oemair.com come in. You can send in your air-end to be rebuilt to original specs and they offer a guarantee that is the best in the business.  To learn more about this service, visit http://oemaircompressor.com/aircompressorairendrebuilding.aspx.

Rebuilding an air-end can save you thousands of dollars. Air Compressors are expensive and it doesn't make sense to get a new one when the air-end is at the end of its service life. Industrial Air-end rebuilding just makes sense (and dollars).